Use and maintenance of flatbed carts
The service life of the flat trolley is generally 3-5 years, and the correct use of the flat trolley and timely maintenance of the flat trolley can extend its service life.Proper maintenance will extend the service life of the flat trolley, the main maintenance check oil, air and lubrication.
Check the oil level every six months. The newly injected oil into the rubber container should be 5mm lower than the liquid level, and the fork must be in the lowest position when adding oil. When the seal is replaced, air may enter the hydraulic system, place the joystick in the LOWER position, and then swing the handle a dozen times. Use motor oil or lubricating oil to lubricate moving parts. In addition, it is necessary to pay attention to daily inspection and maintenance, the inspection of the flat cart can reduce wear as much as possible, and special attention is required to the wheels, axles, handles, forks, lifting and lowering controls. Whenever the work is completed, the fork should be unloaded and lowered to the lowest position. The flatbed trolley will inevitably encounter some faults in the process of use, and understanding the common use faults will greatly improve the efficiency of the use of handling tools.
In general, in the process of using a flat cart, please pay attention to the following points:
1, do not overload;
2, whether the ground conditions allow the use;
3, the correct loading of goods;
4, please wear safety shoes and gloves when operating;
5, please do a thorough operation check before each use;
6, use the correct lifting technology to assemble the machine;
7, do not ignore the potential dangers that may exist in the operation process.



